PanoServer 3000 Functions |
Multi Viewing Mode |
Full view of each camera |
Sequential view of each camera |
Quad view of all cameras |
De-warping view of panoramic video |
Real Time Panoramic De-warping*1 |
Two 180¢X splits de-warping for adjusting to human visual sense |
Real Time Perspective De-warping*1 |
Quad view of perspective de-warping, realize mechanism-less
Pan-Tilt-Zoom
control |
Click-and-See Control of Speed Dome Camera*1*2 |
Achieve ¡§What You Click is What You See¡¨ control of speed
dome camera without on-site calibration |
Direct Control of Speed Dome Camera*2 |
Support up to four speed dome camera Pan-Tilt-Zoom control
via
RS422/RS485 interface |
Speed Dome Patrol Function*2 |
Patrol position editing and execution for speed dome camera |
Motion Detection Function |
Multiple motion detection area editing, adjustable sensitivity
level and object
size |
Omni-directional Motion Tracking with MapCam
Only*1 |
Automatically keep the largest moving object on the center
of panoramic
de-warping view |
Omni-directional Motion Tracking with Speed dome
Camera*1*2 |
Automatically keep chasing the largest moving object with
combined speed
dome camera |
Voice Communication Function |
Listening and talking with the remote site |
Image Snapping Function |
Snapping important scenes with high quality picture |
Auto Image Snapping Function |
Automatically trigger the snapping function by preset events,
e.g. motion
detected, input port activated |
Image Browsing |
To browse the snapped image |
Various Scheduling Function |
Scheduling start and stop motion detection/tracking, GPIO,
image snapping
function |
Stable Operation Platform |
Flash run embedded linux system |
Auto System Recovery |
Build-in hardware watch-dog timer |
GPIO Control |
Four input and four output ports for integrating other device |
Video Loss Alarm |
To raise an alarm when losing video signal |
Case Open Alarm |
To raise an alarm when case is opened |